Separate Slip Ring
The split type slip ring family is a deviation from the united capsule slip ring. It is specially designed for some applications when it’s hard to install a conventional slip ring. The split ring and brush block are separated components to be installed into customer’s application. Therefore the brush block part is relatively flexible and can be standard or defined by customer. The two semi-circulars sections are finish machined and gold plated at the factory in the assembled condition, the effects of the gap on the overall operation of the slip ring are minimized.
Separate Slip Ring consists of a rotor and a brush stator. With a through hole in the rotor, this Separate Slip Ring model is compatible with hydraulic channel, pneumatic channel and transmission shaft. Because of its separate design, separate slip ring is able to meet harsh requirements demanded by limited space and special installation in the customer's application. Pin contact is alternative for wire contact.
Electrical & Electronics | Mechanical |
Enviromental | |||
Number of Circuits |
1-15 or more |
Rotating Speed |
0-100rpm or higher |
Temperature |
Industrial: -20℃~+60℃ |
Current |
1-3A per circuit |
Contact Material |
Gold-to-gold |
Military: -50℃~+80℃ | |
Voltage |
0-24VAC/DC | Humidity | 60%RH or higher | ||
Dielectric Strength |
≥500VAC@50Hz |
Wire Type |
AWG28#/AWG32# Teflon or others |
Others | |
Insulation Resistance | ≥100MΩ@500VDC |
Life Span |
Customizable | ||
Dynamic Contact Resistance |
1mΩ min. |
Wire Length |
250mm ( optional ) | ||
Features:
Separated stator and rotor
●Transmit power
●Signal
●Low contact resistance
●Easy to install
●Fit in limited
●Space
Options:
●Working Speed
●Number of Circuits
●Current
●Wire Length
Main Applications:
●Instruments, meters and measurement equipment
●Aviation, military and medical instruments
●Aerial camera platform, military/private UAV
LPS Separate Slip Rings | ||||
Model | Number of Circuits | Voltage （AC/DC） | Current (A) | OD*Length （mm） |
LPS-03 | 3 | 240V | 1-3A | φ0x11.43 |
LPS-04 | 4 | 240V | 1-3A | φ0x10 |
LPS-06 | 6 | 240V | 1-3A | φ9.55x13.2 |
LPS-08 | 8 | 240V | 1-3A | φ9.55x15 |
LPS-10 | 10 | 240V | 1-3A | φ9.55x17.3 |
LPS-12 | 12 | 240V | 1-3A | φ9.55x23 |
LPS-15 | 15 | 240V | 1-3A | φ9.55x27.6 |
Wire Color Code
Wire Size | Ring | Color | Ring | Color | Ring | Color | Ring | Color |
AWG28# Silver-Plated Teflon UL | #1 | BLK | #2 | BRN | #3 | RED | #4 | ORN |
#5 | YEL | #6 | GRN | #7 | DK BLU | #8 | PPL | |
#9 | GRY | #10 | WHT | #11 | PNK | #12 | LT BLU |
Installation Specifications:
The slip ring is designed to be mounted in a separate way, in which the rotor and stator is separately fixed.
Align the grooves of rings and brush wires and match well in case of deviation from rings after the rotor of the slip ring is fixed on the spindle.
The slip ring should be protected from dust and moist. If it is used outdoors, a protection cover should be considered. (Custom slip rings are not included)
Protect all wire skins from being damaged during the rotation of the equipment. The end of all wires should not bear weight, withstand force, or be pulled in wires arrangement.
Use an exclusive tool while operating wire stripping, and do not damage the wire core.
Wield wires to the wire terminals with careful amount of soldering tin in stator wire connection, avoiding electric performance weakening between rings due to excessive soldering tin.
Hot Tags: separate slip ring, China separate slip ring manufacturers, suppliers, factory, ltn slip ring, slip ring system, Pancake Slip Ring, 3 phase ac slip ring induction motor, non contact slip ring, slip ring with motor
Send Inquiry
